New Stereo for my 2008 Subaru Outback Limited.

Finished product. Looks great.

I also kept the original Aux input plug and added a USB jack straight to the stereo.

Not a great shot, but you can see them.

OEM Setup. Plays CDs. Aux in. Satellite radio.

Before pic. It still works and all, but I really want what I had in the car that I just gave my sister. Wireless Android auto with USB/Micro SD options.

I picked this one out. It's not a brand name, but I'm going to fix anything that breaks.

It's got all the goodies: USB type A and C, MicroSD, and wireless Android Auto.

I do have a problem. No Aux jack in the back.

I still want to use the Aux jack that came OE in my center console. I can use the USB cable that was installed by a previous owner in the back here, though. I'll have to add a jack.

It seems simple enough.

The PCB for the front controls and inputs is that one on the left. I can't see any leads for the aux-in jack here, though. Guess I'll have a pop at the other side.

Ah. It's mounted with the USB-C connector.

Alright. I'll solder right to the jack's board here.

The one I grabbed doesn't have the Mic wire.

Not a problem. Don't need it. I'll be doing all my talking via bluetooth or Android Auto.

The right and left audio channels were a little more difficult to solder.

Jack itself is fine. It's going to work the same.

Tight fit.

I did have to Dremel-cut out a small amount of plastic for the wires.

Jack's not my name, Jack's my job.

I wanted this. Boom. Now I have to get it a connector car-side.

No 3.5mm connector either. Obviously.

We're looking at the CN402 8P connector. This picture is unhelpful. Forums are also unhelpful. Looks like I'm going probing.

The black and white thing here is aux-in jack from the center console.

6 pins. Why do I need 6 pins for a 4-wire jack? Let's figure out what's what.

The black box PCB.

Oh. Okay. It should have 5 pins, then.

The results.

Okay. I still only need 3.

I'm going to prep the new stereo cable now.

https://pinoutguide.com/Car-Stereo-Subaru-Suzuki/subaru_legacy_2008_pinout.shtml I needed this as the connector I got at the junkyard was not any of the right colors, despite coming from an '07 Impreza.

It's ready.

I have everything I need. I did test continuity to the front aux-in jack before I left.

Under the center console.

Nothing I haven't seen before. Wait, what's the red thing? It's an electronics something. Board is marked HW-771 V1.2 Let's see what a quick search says.

Treasure! Free Bluetooth/SD Micro/USB-A module.

I know exactly which project to use this on. My stereo in my game room needs an upgrade like this. I'll test it later.

If you haven't done this before, you would start with the bottom of the console trim, not here. I'm starting here.

'Why the vents?' you ask. There's a secret cable back there that needs to be removed first or you could break it.

I couldn't quite reach it. Looks like I'll have to go behind the instrument cluster.

This is the driver's panel being removed.

This support plate is also in the way before I can move the instrument cluster.

Two 10mm head bolts. I'm going to have to take a break here, since the wife wanted something else also done today.

Instrument cluster is loose. Now I can get all handy in there.

Two hands allows me to press the retaining clip as I pull the cable off the heater box.

This cowel has to be removed seperately.

It had a few crustys on the sides. I'm definitely cleaning this stuff before putting everything back together.

This also has to be taken out.

It has a connector for the not-cigarette-lighter. To pull this out, the car has to have the key in the on position and the shifter at least pulled down to Neutral. Make sure to have the parking/E-brake pulled. Don't ask how I know this.

Side trim pieces next. No, not those side pieces.

I'm not going to make any more infidelity jokes here. I'll save those for the podcast.

Mounted in the back. Screws in the back.

I have a fitting for any situation. Getting a bit head in the back just means a small extension.

Everything else is mounted with these 3 screws (per side.)

Unplugging it all is a small pain.

I have also unplugged the stereo at this point.

Out. Out damned thing.

I have to take another "honey-do" break at this point.

My new passenger.

I almost forgot to eject my daughter's CD before I got here. Granted, it would have only set me back 5 minutes to make aa new one.

I do need my temperature controls back, tho.

It would be a rather painful rest of the car's life without this.

CN402. I know your secrets. Your time is up.

I'm going to clip and solder a male 3.5mm connector here.

Done. That wire trace I made from the Aux-in box is used here on the other end.

I also had plenty of heat shrink thanks to Andy. My portable soldering iron is invaluable for these sorts of things.

Here's everything.

I have to install the camera on a different day due to more wiring to be done in the back of the car, too. The wife has more "honey-do's" for me to accomplish this weekend.

Brackets fit right.

I'll have a lot of unused space behind this part of my dashboard now.

Test fit.

I picked the right mounting holes first time. Groovy.

Mounting the climate controls.

I cannot stress enough how much easier this will be to put in than take out. Don't forget to re-connect the heater cable! And put the instrument cluster and driver's panel back!

Going to detail just a bit.

Yeah, no way I'm going to forget to clean up all the nasties from the car's past lives!

I lied.

The front plate has a lip that doesn't fit over the stereo. Aren't dual-DIN's supposed to be the same size?

You didn't cut it. Now you get cut.

My Dremel got to be used twice? I'm sure if it could talk, it would say something happy about it. The second picture is NOT the finished product, I forgot to take a picture of that. I did make a small oopsie, though, and sanded every cut surface pretty smooth and even.

Installation is opposite of removal from there.

Finished product. I did have to squeeze the top of the front cover plate to fit between the stereo and the dash vinyl. Aux works as expected, so does the USB, though it's probably going to be used as a luxury for my daughter, since she'll have a blast putting her music on whether USB or Aux.

I did leave the key in a bit long between the "honey-do's", so my battery died, hence the "Err 1U" on my instrument cluster. A charge-up and restart later, we're good to go.